aykd_scb@126.com
+86-372-2595077/2595078/2595088
главный технический параметр：
модель | GV40-4-A |
RatedStroke (mm) | 3 |
TotalStroke (mm) | 3.2 |
RatedCurrent (A) | 0.8 |
RatedForce (N) | 48* |
RoomTemperatureResistance20℃ (Ω) | 10 |
ForceLagCharacteristic （%） | ≤2 |
CurrentLagCharacteristic （%） | ≤2 |
ElectrifyFrequency （%） | 100 |
RepeatAccuracy (%) | ≤1 |
StaticOilPressure (MPa) | 21 |
| Thermal Endurance Class | F |
The parameter marked “*” an be adjusted according to the requirements.
Steady Stroke-Force Curve
Externality & Installation Dimensions
Product Code: GV40-4-A
Operating Notice
Installation Position The vent hole must be installed on above.
Exhaust In order to realize stabilization control, please make the air out of the solenoid thoroughly, and full of oil. When exhausting, please open the bolt slowly and slowly. Be careful the spilling!
Adjust The Bolt By Hand If there is no current at the beginning adjustment or because of electrical accident, you can turn the bolt by hand; set the pressure or flux of the valve temporarily, please make sure the handle bolt return to the position at normal operating.
Explanation Of Sample
If the application is beyond the catalogue, please contact with us.
Characteristic curve for reference only.
The main performance parameter is obtained in the conditions of lab. Finally explanation and changing of the parameters by KAIDI.
aykd_scb@126.com 
+86-372-2595077/2595078/2595088 
中文(简体)
English
Русский
Español
